|
|
 |
|
NRG Greenboard™40mm – 60mm – 75mm
showing unique diagonal grooving system – Advantages better key for rendered surface, in addition to allowing the inner surface to breath against the sarking membrane. |
|
 |
 |
|
6mm External Bead x 3000mm lengths
Application use for external corner and sunhoods |
|
|
 |
|
3mm Render Bead
Application, used in composite construction i.e. fibrous cement, textured sheeting adjoins Greenboard™ finished surface.
|
|
|
 |
|
15 Sill Bead x 40mm & 60mm width x 6mm build x 3000mm |
|
|
 |
|
Reveal Bead 40mm - 60mm - 75mm
width x 6mm build x 3600mm – Application, Window Reveals/Control Joints |
|
|
 |
|
Starter Bead 40mm - 60mm - 75mm
width x 6mm build x 3000mm – Application, slab, high set, above roof |
|
|
 |
|
Expansion Joint Bead x 6mm x 3000mm
Application, between floor levels and gables - horizontally, vertically wall areas and steps in floor levels as well as creating a ‘drip grove’ line in under side of NRG Sunhood. |
|
|
 |
|
Bostik PVC Primer 5077
Application, used to prime reveal beads prior to sealing against aluminium window, this will prevent ‘roll-back’ of sealant in addition to providing a better bond for applying texture paint finish. |
|
|
 |
|
Adhesives & Sealant
Bostik Acrylic Adhesive ‘No More Nails’ used to bond Greenboard™ panels together, both horizontal and vertical edges.
Bostik Seal’n Flex – Application, sealing against aluminium window and door openings – expansion joints filler etc. |
|
|
 |
|
Stud Fixing & Washers
Timber Fixing and Metal Fixings
| |
• N.B. Screws are to be Galvanised or Treated (Class 3)
• All NRG PVC Washers and Fixings are required at 300mm
Maximum centres - Refer to Page 9 DWG 1.0
• Extreme environments - consideration should be given to
the use of T316 Stainless Steel Fixings |
|
| NRG Greenboard™ |
Timber Framing Treated CSK Ribbed Head |
Steel Framing Treated CSK Drill Point |
| 40mm |
10.8 x 60mm |
55mm |
| 60mm |
10.8 x 80mm |
75mm |
| 75mm |
10.8 x 95mm |
90mm |
|
|
|
 |
|
Foam Adhesives
Application – Installation of both Sunhoods & Blades, ideal for filling minor chip corner etc.
Powers – Expanded Trigger Foam
Power(s) Foam Cleaner(s)x |
|
|
 |
|
Masonry Fixings
a simple but effective method of fixing Greenboard™ to masonry surfaces.
|
| NRG Greenboard™ |
Hilti™ IDP
Polypropylene Anchors |
Hilti™ IDP Anchors
Maximum Fixing Centers |
| 40mm |
70mm |
Refer:- iv) above for
spacing details |
| 60mm |
90mm |
| 75mm |
110mm |
|
|
|
 |
|
NRG Greenbaord™ Mesh
Reinforced, alkali resistant, fibreglass 160g/m mesh |
|
|
 |
|
NRG 3B Greenboard Reinforced Render
Modified polymer cement render. Just add water. |
|
|
 |
|
Sunhood & Blades Fixing
Sunhood & Blade Fixing
Galvanised Brackets
Coach Screws (Timber)
Anchor Bolts (Masonry)
Purlin Bolts (Steel) |
|
|
 |
|
Waterproofing Membrane
Apply over finished rendered surface to waterproof NRG Sunhoods ... prior to application of texture paint finish. |
|
|
